Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.
An upgraded flagship DJI Enterprise drone platform, the DJI M350 RTK sets a new benchmark for the industry. This next-generation drone platform features an all-new video transmission system and control experience, a more efficient battery system, comprehensive safety features, and robust payload and expansion capabilities.
55-Min Max Flight Time [1]
IP55 Rating [2]
DJI O3 Enterprise Transmission
DJI RC Plus
400 Battery Cycles [3]
6-Directional Sensing & Positioning
Night-Vision FPV Camera
Multi-Payload Support
1. Measured with Matrice 350 RTK flying at approximately 8 m/s without payloads in a windless environment until the battery level reached 0%. Data is for reference only. Please pay attention to reminders in the app for the actual usage time.
2. Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.
3. Up to 400 cycles if the accumulative duration of battery level ≥ 90% is less than 120 days within 12 months.
Matrice 350 RTK adopts DJI O3 Enterprise Transmission, which supports triple-channel 1080p HD live feeds, and a max transmission distance of 20 km. Both the aircraft and the remote controller have a four-antenna transceiver system, which can intelligently select the two optimal antennas to transmit signals. In comparison, the four antennas receive signals simultaneously. In this way, anti-interference capabilities are significantly improved, and transmission stability is optimised.
Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.
Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.
Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.
Equipped with a 7-inch high-bright screen, DJI RC Plus supports Dual Operator Mode and comes with a standard WB37 external battery that offers an operating time of up to six hours, meeting various operation needs.
The Matrice 350 RTK is equipped with a new TB65 dual-battery system, which supports battery hot swapping and allows for multiple flights without powering off. The battery can be charged up to 400 cycles, reducing the cost of a single flight.
In Storage Mode, charge the battery to 50%, which is good for long-term storage. In Ready-to-Fly Mode, quickly charge multiple battery sets to 90% to start operation at any time and extend the battery life.
When the battery station is connected to DJI RC Plus, the DJI Pilot 2 app will display the battery status and health information. In addition, you can set the number of self-discharge days, update the firmware, export logs, and access other quick operations with one tap.
The battery station is designed with 360°-movement wheels for more convenient transportation and transitions.
With DJI FlightHub 2, you can take your drone operations to the next level by unlocking the full functionality of the DJI Dock from the cloud. Schedule missions, create and edit flight routes, and manage data collected by your drones, all from a centralized platform. In addition, this cloud-based solution allows you to easily manage and monitor your drone operations from anywhere worldwide, providing unparalleled flexibility and efficiency.
The Matrice 350 RTK adds a new arm lock detection function to avoid the risk of unlocked arm sleeves, allowing you to focus on flight with more peace of mind.
Thanks to its excellent night vision capabilities, the FPV camera can clearly present the surroundings and obstacles during flight at night. It works in tandem with the PinPoint function to provide better navigation for safe flight, assisting in more confident operation at night.
The Matrice 350 RTK is designed with a six-directional binocular vision system and an infrared sensing system for six-directional awareness, positioning, and obstacle-sensing capabilities, providing comprehensive protection during flight. [7]
With the CSM Radar installed, Matrice 350 RTK can detect subtle obstacles upward or within the horizontal 360° range and avoid them in time. [9] The effective detection range is up to 30 m, [10] further improving flight safety.
Both the aircraft system and the sensor system of the Matrice 350 RTK adopt a redundancy design to ensure flight safety, allowing you to cope with harsh operating environments more confidently.
7. There are certain blind areas of visual sensing and infrared sensing. Positioning and obstacle-sensing performance may be affected by the flight environment and obstacle characteristics. Please fly with caution.
9. Please enable the radar obstacle avoidance function in the DJI Pilot 2 app and set the aircraft safety distance (> 2.5 m is recommended), and the flight speed should be < 10 m/s.
10. Measured when the radar reflection cross-sectional area of the detection target is ≥ 0.4 m². The effective detection range may vary with the size and material of the obstacle.
The Matrice 350 RTK supports a single downward gimbal, dual downward gimbals, and a single upward gimbal, and can carry three payloads simultaneously. The aircraft also has an E-Port open interface and a max payload capacity of 2.7 kg, meeting the needs of different operation scenarios like public safety, inspection, and mapping.
The All-in-one inspection sensor. Gather multi-faceted data and cut down your inspection time without sacrificing accuracy.
Visual inspections made safe. Capture intricate details and precise elements from a safe distance using a lossless hybrid zoom sensor.
LiDAR scanning made accessible. With a point rate of 240,000 pts/s, the L2 reliably gives you practical and accurate point clouds.
Efficient and accurate photogrammetry. Meet DJI's new full-frame sensor that gives you both speed and accuracy.
DJI Zenmuse H2ON is designed for Night Missions. Equipped with starlight sensors that can detect light sources as low as 0.0001 Lux.
The U10 is a gas detection sensor that uses TDLAS to identify methane leaks from up to 100m away or at concentrations as low as 5ppm.
M300 RTK support third party paylods for specialized missions and tasks including non camera payload such as LED light.
The P3 is an integrated drone imaging solution that enhances productivity, offers a wider range of inspection capabilities.
The Sniffer4D enables you to accurately collect, analyse and visualise hyper-local air pollution information.
Speedip is an intelligent water sampling system that offers efficient water sampling and situational awareness.
The payload features a five-lens aerial oblique camera that makes data collection much quicker and accurate without the use of GCPs.
Matrice 350 RTK supports Waypoint, Mapping, Oblique, and Linear Flight missions. You can use Terrain Follow or Smart Oblique for efficient data collection. Together with DJI Terra, you can quickly obtain HD 2D and 3D digital results, enabling high-precision and high-efficiency mapping operation.
With functions like the high-precision PinPoint and cloud-based real-time mapping, the Matrice 350 RTK can link the air, ground, and cloud together. After the aircraft completes image collection, DJI FlightHub 2 can quickly model the operation site and transmit command information to the aircraft and ground operators. Both the remote controller and FlightHub 2 support point, line, surface drawing, and real-time uploading, and can cooperate with the aircraft to livestream the real-time operation view, breaking through communication barriers for air-to-ground collaborative operation.
Through Live Mission Recording, the Matrice 350 RTK can generate and store flight route files that can be used at any time to realize automated operation and make repetitive inspection no longer time-consuming or effort-consuming. When using AI Spot-Check, the Matrice 350 RTK supports automatic framing and manual adjustment of subjects to improve the accuracy of repeated shooting and the quality of inspection operation.
Media Data Encryption
Local Data Mode
One-Tap Clear All Device Data
AES-256 Video Transmission Encryption
Cloud API
Get the support you need. From choosing the right drones to getting professional training, our experienced drone consultants ensure that all your needs are met.
